Jinzhou Sata Fused Fluxes and New Materials Factory.
Mn Tablet
Mn Tablet
Mn Tablet
  • Mn Tablet

Mn Tablet

General Description of Mn Tablet

Mn Tablet is used to adjust the content of Mn in Aluminium Alloy; it is made by metal powder and pure aluminium in proportion.
Density:3.8-4.1g/cm³
Content: metal powder+ rest
Metal powder:70%、80%
Rest: A-Sodium free flux  B- flux+aluminium

Usage Instructionof Mn Tablet

Before refining flux application, the metal additives can be put into melting furnace or holding furnace directly. To achieve the high efficiency, the usage should match up the right notice as follows:
  1. The temperature of the aluminium liquid not lower than 720℃. the best application temperature is 750+5℃
  2. It is sinking down by itself. So keep the surface clean is very important, to avoid wrapped by the floating slag or the slag which floated on the surface. So it must be put into after drossing.
  3. After skimming the dross, the tablet should be put directly in to the aluminium molten evenly with tablet please do not crush it.keep it stay for 20-30mintures, stir it and let it stay for 7-15 minutes. Sample analysis should be performed.

Dosageof Mn Tablet

Dosage=(Target-initial)*aluminium wt% /(90% * the alloy element content in the metal additives)
Target: element content of target
Initial: Original content of elements in the melt
Wt: The weights of aluminium melt

Specificationof Mn Tablet

Product Percentage of Element Density Appearance Work Temperature
Ti Tablet
Ti: 75%,80%,85%,90%,95%
Balance: pure aluminium or flux
3.8-4.1g/cm³ Grey 750+5℃
Fe Tablet
Fe: 75%,80%
Balance: pure aluminium or flux
Grey Brown
Mn Tablet
Mn: 70%,80%
Balance: pure aluminium or flux
Black Grey
Cr Tablet
Cr: 75%,85%
Balance: pure aluminium or flux
Grey
Cu Tablet
Cu: 75% - 80% - 85% - 90%
Balance: pure aluminium or flux
Reddish Brown

lAdvantage of Mn Tablet

  • High density, easy to sink down,
  • Reaction quickly, no oxidation and burn loss

Package of Mn Tablet

500g/tablet.4 tablets wrapped by foil package load in 20kg carton.

See More
  • SATA-GF-NK2

    SATA-GF-NK2

    September 18, 2019SATA-GF-NK2General Description of SATA-GF-NK2SATA-GF-NK2 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which is excellent in removing non-metallic inc...view
  • Covering Flux

    Covering Flux

    September 28, 2018Covering flux is used for smelting and casting. It has strong surface tension, not easy to rupture, good protection, long duration, with strong absorption to hydrogen oxidation inclusions and not easy...view
  • Mg-Remover Flux

    Mg-Remover Flux

    September 28, 2018General introductionMagnesium plays a very important part in producing the required physical properties of many aluminium alloys, its presence in others is not required at all or must be held to a ver...view
  • Synthetic Cryolite

    Synthetic Cryolite

    September 28, 2018General descriptionMolecular Formula: Na3AlF6CAS NO.:13775-53-6Density: 2.95-3.05g/cm3Bulk Density: 1.3-1.55g/lAppearance: Sandy, Powder, GranuleSize: 0-10mm 100% -0.045mm 10%maxThe grain size can ...view
Leave a Message Email Us

we will contact you within 24 hours.