Drossing Fluxes For Aluminum Slag, Aluminum Drossing Flux | SATA
Jinzhou Sata Fused Fluxes and New Materials Factory.
Drossing Flux
Drossing Flux
Drossing Flux
  • Drossing Flux

Drossing Flux (SATA-PF-310)

Description of Drossing Flux (SATA-PF-310)

SATA drossing flux is specially developed for removing the slag from the aluminium melt before or after refining procedure. It is for in- furnace use. The slag after treatment is dry ,loose, easy to be removed.
Apperance: White or gray white in powder
Application temperature: 700-780 ℃
a)More choice for your option,
b)1. Sodium-free drossing flux which suitable for High magnesium al-alloy.
c)2. Eco-friendly drossing flux with less emission

Advantage of Drossing Flux (SATA-PF-310)

  • Mild Exothermic flux; separate the aluminium with the dross. Decomposition of alumina in slag, to make the slag dry and loose, easy for removing.
  • Enhance the aluminium melt purity, improve the alloy properties greatly, and reduce metal loss.
  • Reduce the slag formed on the furnace linings and bottom. Damage of furnace can be avoided. Increase the service life of furnace. Save the labor and power loss in furnace cleaning due to frequency of cleaning is minimized.
  • Sodium free drossing flux can avoid the white spot to be occurred on the surface of alumininum and its alloy.
  • Eco-friendly drossing flux with less emission is benefit for workers, enviorment with high efficiency.

Package of Drossing Flux (SATA-PF-310)

2.5kg or 5.0kg PE bag, 20~25kg PP bag or 20-25kg cartons.

Dosage of Drossing Flux (SATA-PF-310)

0.2%~0.5% of molten aluminium weight, adjust the dosage according to furnace type and purity of furnace charge.

Storage of Drossing Flux (SATA-PF-310)

Store in a dry and cool place with good ventilation. Original packing should be kept until ready to use.


See More
  • Special Granulated Fluxes For ADC12

    Special Granulated Fluxes For ADC12

    December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
  • Master Alloy

    Master Alloy

    September 18, 2019Master AlloyDescription of Master AlloySATA-Master alloys melt at a lower temperature as compared to primary metals. Controlled addition makes it easier to produce the final alloy of consistent compos...view
  • Furnace Cleaning Flux

    Furnace Cleaning Flux

    September 6, 2019Furnace Cleaning Flux (SATA-PF-390)Description of Furnace Cleaning Flux (SATA-PF-390)Slag will be generated in the furnace during smelting after a period of time, which not only shorten the life of re...view
  • Granulated Calcium Removal Flux

    Granulated Calcium Removal Flux

    October 13, 2021General Description of Granulated Calcium Removal FluxCalcium is a kind of impurity in aluminium alloys; Ca reacts with Aluminium alloy to form the CaAl4 compound which will destroy the surface’s fil...view
Leave a Message Email Us

we will contact you within 24 hours.