Slagging Fluxes For Steel - Jinzhou Sata Fused Fluxes and New Materials Factory.
Jinzhou Sata Fused Fluxes and New Materials Factory.
Slagging Fluxes For Steel
Slagging Fluxes For Steel
Slagging Fluxes For Steel

Description & Application of Slagging Fluxes For Steel

Compare with the Caf2,This kind of flux can reduce 40-60% of the dosage than Caf2. At the meanwhile reduce the emission of SIF4 and other harmful gas.Its a new developed eco-friendly efficient flux applied on steel industry. It can effectively reduce the melting point of lime and play the role of slag melting; and the fluorine content in the slagging agent is lower than the fluorine content of fluorite, and the environmental pollution is small, improving the working environment of workers; it has a better slag than fluorite The effect is that the temperature drop of the molten steel in the slagging process is small, which has an obvious effect on improving the quality of molten steel, shortening the refining time, and reducing the cost of steelmaking.

Advantage of Slagging Fluxes For Steel:

  • It is a high-efficiency,fast high grade slag fluxes.Compare with the Caf2 as slag agent.The dosage has reduced significantly.Save 50% or more than Caf2.The reduction in the amount of fluoride will also have environmental benefits
  • With low silicon content and significantly reduced desulfurization time,the product can extend the life of refractory materials in the furnace. According to our customers' experience, the life of refractory materials can increase by at least 5%
  • The dissolution of calcium oxide in the slag is of great significance to desulfurization. During the desulfurization  process,  the  lime  particles are usually covered by a layer of sediment when in contact with molten steel, which limits the solubility of the stone. Better slag, more effective, faster desulfurization and purer molten steel

Specification of Slagging Fluxes For Steel

Appearance: off-white granular
Shelf life: 12 months

Package of Slagging Fluxes For Steel

Packed in 1000kg bags or customerized
Stored in dry, well-ventilated place, and avoid direct sunlight

See More
  • Granulated Fused Refining Flux for Aluminium Cable & Wires

    Granulated Fused Refining Flux for Aluminium Cable & Wires

    October 13, 2021General Description of Granulated Fused Refining Flux for Aluminium Cable &wiresAluminium Cable &wires is a kind of 1xxx and 6xxx series alloy, requires the aluminium alloy with good electrica...view
  • 2# Flux

    2# Flux

    September 28, 2018General introduction1) It used as a washing and melt covering for crucible, ladle and other tools for smelting and casting mag and mag alloy with the features of good wetting ability with the molten m...view
  • Anhydrous Magnesium Chloride

    Anhydrous Magnesium Chloride

    September 4, 2019Magnesium Chloride Anhydrous (AMC)General Description of Magnesium Chloride Anhydrous (AMC)Name: Magnesium Chloride Anhydrous (AMC)By-product of titanium sponge Appearance: White Block/Flake/PowderGra...view
  • Special Granulated Fluxes For ADC12

    Special Granulated Fluxes For ADC12

    December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
Leave a Message Email Us

we will contact you within 24 hours.