Iron Tablet Aluminium Alloy Additive, Aluminium Iron Tablets | SATA
Jinzhou Sata Fused Fluxes and New Materials Factory.
Fe Tablet
Fe Tablet
Fe Tablet
  • Fe Tablet
  • Fe Tablet

Fe Tablet

General Description of Fe Tablet

Fe Tablet is used to adjust the content of Fe in Aluminium Alloy; it is made by metal powder and pure aluminium in proportion.
Density:3.8-4.1g/cm³
Content: metal powder+ rest
Metal powder:75%、80%
Rest: A-Sodium free flux  B- flux+aluminium

Usage Instruction of Fe Tablet

Before refining flux application, the metal additives can be put into melting furnace or holding furnace directly. To achieve the high efficiency, the usage should match up the right notice as follows:
  1. The temperature of the aluminium liquid not lower than 720℃. the best application temperature is 750+5℃
  2. It is sinking down by itself. So keep the surface clean is very important, to avoid wrapped by the floating slag or the slag which floated on the surface. So it must be put into after drossing.
  3. After skimming the dross, the tablet should be put directly in to the aluminium molten evenly with tablet please do not crush it, keep it stay for 20-30mintures. Stir it and let it stay  for 7-15 minutes. Sample analysis should be performed.

Dosage of Fe Tablet

Dosage=(Target-initial)*aluminium wt% /(90% * the alloy element content in the metal additives)
Target: element content of target
Initial: Original content of elements in the melt
Wt: The weights of aluminium melt

Specification of Fe Tablet

Product Percentage of Element Density Appearance Work Temperature
Ti Tablet
Ti: 75%,80%,85%,90%,95%
Balance: pure aluminium or flux
3.8-4.1g/cm³ Grey 750+5℃
Fe Tablet
Fe: 75%,80%
Balance: pure aluminium or flux
Grey Brown
Mn Tablet
Mn: 70%,80%
Balance: pure aluminium or flux
Black Grey
Cr Tablet
Cr: 75%,85%
Balance: pure aluminium or flux
Grey
Cu Tablet
Cu: 75% - 80% - 85% - 90%
Balance: pure aluminium or flux
Reddish Brown

Advantage of Fe Tablet

  • High density, easy to sink down
  • Reaction quickly, no oxidation and burn loss

Package of Fe Tablet

500g/tablet.4 tablets wrapped by foil package load in 20kg carton.

See More
  • Sodium Fluosilicate/Hexafluorosilicate (SSF)

    Sodium Fluosilicate/Hexafluorosilicate (SSF)

    September 28, 2018Sodium Silicfluoride,Sodium Fluosilicate General introduction: Chemical Formula : Na2SiF6 UN NO.: 2674 CAS NO.:16893-85-9 Off white crystalline powder Solubility: Soluble in water up to 1.45g/100ML a...view
  • Boron Nitride Coating

    Boron Nitride Coating

    October 13, 2021Appearance: White Powder/Pasty LiquidSmell: No SmellMelting Point: 3000℃Mohs hardness: 2Water Solubility: Completely Soluble in WaterCAS NO: 10043-11-5EINECS NO: 233-136-6General Description of Boron...view
  • Granulated Fused Refining Flux for Aluminium Cable & Wires

    Granulated Fused Refining Flux for Aluminium Cable & Wires

    October 13, 2021General Description of Granulated Fused Refining Flux for Aluminium Cable &wiresAluminium Cable &wires is a kind of 1xxx and 6xxx series alloy, requires the aluminium alloy with good electrica...view
  • Cr Tablet

    Cr Tablet

    September 18, 2019Cr TabletGeneral Description of Cr TabletCr Tablet is used to adjust the content of Cr in Aluminium Alloy; it is made by metal powder and pure aluminium in proportion. Density:3.4-4.2g/cm3Content: met...view
Leave a Message Email Us

we will contact you within 24 hours.