Name: SATA-GF-NK2
Brand: Jinzhou Sata Fused Fluxes and New Materials Factory.

SATA-GF-NK2

General Description of SATA-GF-NK2

SATA-GF-NK2 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which is excellent in removing non-metallic inclusions and hydrogen from molten aluminum and aluminum alloys in ladle furnace. An eutectic can be formed to make the melting point of fluxes lower than 480℃. Molten aluminum and drosses can be easily separated to facilitate slag-off. SATA-GF-NK2 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (USA).

Application of SATA-GF-NK2

Suitable for A356 and ADC12 alloys, for ladle furnace
Used to purify molten aluminum
Used to remove non-metallic inclusions and hydrogen in molten aluminum
By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance

Advantage of SATA-GF-NK2

Less dust and fume, and low dosage
Low melting point for rapid dispersion
Obtain dry and loose dross, complete separation from molten aluminum
Reduce porosity, improve mechanical and casting properties of alloys
Increase the fluidity of molten aluminum

Specification of SATA-GF-NK2

Furnace temperature: 690-710℃
Dosage: 0.25-1kg/MT
Appearance: off-white granule
Grain size: 1-3mm/1-2.5mm
Shelf life: 12 months

Package of SATA-GF-NK2

Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight.

Grain Refiner
September 18, 2019Grain RefinerGeneral Description of Grain RefinerGrain refiner can optimize the form and grain distribution of eutectic silicon. The material synthetic mechanical properties, strength and ductility ar...view
Special Granulated Fluxes For ADC12
December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
Water Based Zircon Coating
December 25, 2020Description of Water Based Zircon Coating:It is based on the Zircon powder of high purity, with the character of high refractoriness and good burnt-on sand resistance. It has excellent thixotropy and ...view
Synthetic Cryolite
September 28, 2018General descriptionMolecular Formula: Na3AlF6CAS NO.:13775-53-6Density: 2.95-3.05g/cm3Bulk Density: 1.3-1.55g/lAppearance: Sandy, Powder, GranuleSize: 0-10mm 100% -0.045mm 10%maxThe grain size can ...view