Jinzhou Sata Fused Fluxes and New Materials Factory.
SATA-GF-M11
SATA-GF-M11
SATA-GF-M11
  • SATA-GF-M11

SATA-GF-M11

General Description of SATA-GF-M11

SATA-GF-M11 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering, degassing, etc. SATA-GF-M11 flux is excellent in removing non-metallic inclusions (oxides, carbides and borides) and alkali metals (Na, Li, Ca) from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480℃. Since there is none sodium content in SATA-GF-M11, it has an excellent performance for high magnesium alloys (Mg>2), avoiding the phenomenon of “sodium brittle”. SATA-GF-M11 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (USA).

Application of SATA-GF-M11

  • Suitable for 1xxx/3xxx/8xxx aluminum alloys
  • Used to remove non-metallic inclusions in molten aluminum
  • Used to remove alkali metals in molten aluminum
  • Excellent to remove high magnesium (Mg>2) alloys
  • By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance.
  • Obtain dry and loose drosses

Advantage of SATA-GF-M11

  • Increases the extrusion speed and die life when extruding profiles
  • Reduces the number of breaks in continuous casting
  • Eliminates edge cracks when rolling high Mg aluminium alloys
  • Free of fluorides. Zero fluoride emissions.
  • Non-hazardous compound
  • Low melting point for rapid dispersion (<766°F, 480°C)
  • Less hygroscopic than magnesium
  • Replaces chlorine gas in furnace fluxing
  • Reduces the use of chlorine gas in in-line refining systems
  • Low application rates, typical 0.5 kg / MT aluminium
  • Keeps the furnace, launders, in-line degassers and casting nozzles free from sludge and dross built-up

Specification of SATA-GF-M11

  • Furnace temperature: 700-760℃
  • Dosage: 0.25-1 kg/MT
  • Appearance: off-white granule
  • Grain size: 1-3mm/1-2.5mm
  • Shelf life: 12 months

Package of SATA-GF-M11

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight.

See More
  • Cu Tablet

    Cu Tablet

    September 18, 2019Cu TabletGeneral Description of Cu TabletCu Tablet is used to adjust the content of Cu in Aluminium Alloy; it is made by metal powder and pure aluminium in proportion. Density:3.8-4.1g/cm3Content: met...view
  • Degassing Flux

    Degassing Flux

    September 6, 2019Degassing Flux (SATA-PF-350)General descriptionPractice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of...view
  • Magnesium Chloride Hexahydrate Flake

    Magnesium Chloride Hexahydrate Flake

    September 18, 2019Magnesium Chloride Hexahydrate FlakeGeneral Description of Magnesium Chloride Hexahydrate FlakeChemically, magnesium chloride is represented as MgCl2. It is a naturally occurring mineral salt which is...view
  • Special Granulated Fluxes For ADC12

    Special Granulated Fluxes For ADC12

    December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
Leave a Message Email Us

we will contact you within 24 hours.