Jinzhou Sata Fused Fluxes and New Materials Factory.
SATA-GF-M12
SATA-GF-M12
SATA-GF-M12
  • SATA-GF-M12

SATA-GF-M12

General Description of SATA-GF-M12

SATA-GF-M12 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering, degassing, etc. SATA-GF-M12 flux is excellent in removing non-metallic inclusions (oxides, carbides and borides) and alkali metals (Na, Li, Ca) from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480 ℃. Since there is none sodium content in SATA-GF-M12, it has an excellent performance for high magnesium alloys (Mg>2), avoiding the phenomenon of “sodium brittle”. SATA-GF-M12 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (EPA).

Application of SATA-GF-M12

  • Suitable for 1xxx/5xxx/6xxx aluminum alloys
  • Used to remove non-metallic inclusions in molten aluminum
  • Used to remove alkali metals in molten aluminum
  • Excellent to remove high magnesium (Mg>2) alloys
  • By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance.
  • Obtain dry and loose drosses

Advantage of SATA-GF-M12

  • Increases the extrusion speed and die life when extruding profiles
  • Reduces the number of breaks in continuous casting
  • Eliminates edge cracks when rolling high Mg aluminium alloys
  • Free of fluorides. Zero fluoride emissions
  • Non-hazardous compound
  • Low melting point for rapid dispersion (<766°F, 480°C)
  • Less hygroscopic than magnesium
  • Replaces chlorine gas in furnace fluxing
  • Reduces the use of chlorine gas in in-line refining systems
  • Low application rates, typical 0.5 kg / MT aluminium
  • Keeps the furnace, launders, in-line degassers and casting nozzles free from sludge and dross built-up

Specification of SATA-GF-M12

  • Furnace temperature: 680-720℃
  • Dosage: 0.25-1kg/MT
  • Appearance: off-white granule
  • Grain size: 1-3mm/1-2.5mm
  • Shelf life: 12 months

Package of SATA-GF-M12

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight.
See More
  • Drossing Flux

    Drossing Flux

    September 6, 2019Drossing Flux (SATA-PF-310)DescriptionSATA drossing flux is specially developed for removing the slag from the aluminium melt before or after refining procedure. It is for in- furnace use. The slag af...view
  • Magnesium Chloride Hexahydrate Pellet

    Magnesium Chloride Hexahydrate Pellet

    September 28, 2018General Introduction:Chemical formular: Mgcl2 6H2OPurity: 46.00%min.Appearance: pure white pellet CAS NO.:7791-18-6Application:De-Icing AgentLiquid magnesium chloride is widely used as an anti-icer. I...view
  • Granulated De-Na Flux

    Granulated De-Na Flux

    October 13, 2021General Description of Granulated De-Na FluxSodium is almost insoluble in Aluminium and Aluminium alloy. When the magnesium content in the aluminum alloy exceeds 2%, the sodium in the melt will appear...view
  • Cu Tablet

    Cu Tablet

    September 18, 2019Cu TabletGeneral Description of Cu TabletCu Tablet is used to adjust the content of Cu in Aluminium Alloy; it is made by metal powder and pure aluminium in proportion. Density:3.8-4.1g/cm3Content: met...view
Leave a Message Email Us

we will contact you within 24 hours.