Jinzhou Sata Fused Fluxes and New Materials Factory.
Powder Refining Flux
Powder Refining Flux
Powder Refining Flux
  • Powder Refining Flux

Powder Refining Flux (SATA-PF-330)

General Description of Powder Refining Flux (SATA-PF-330)

For aluminium alloys, since the Al has strong chemical activity, the inclusions and gases are easily generated during the smelting process, and they are distributed inside the alloy after solidification of the melt, which will reduce the alloy’s quality, It is necessary of removing the oxide inclusion, enhance the casting quality and avoid defects in the casting.
SATA-refining flux used for removing non-metallic inclusions from aluminium molten, it also will form a layer that efficiently prevents the aluminium molten from reacting with generating hydrogen pick-up and oxides from the air.
There are two options: One is general refining flux with emission. Another one is fewer fumes during working.

Application of Powder Refining Flux (SATA-PF-330)

  • The flux can be added by manually spreading or added by an injection equipment, when added it by an injection equipment, with the help of nitrogen or argon and flux, the oxide and hydrogen also can be removed , the injection time required is 15-20 minutes, after refining, impurities will float up to the surface.

Advantage of Powder Refining Flux (SATA-PF-330)

  • Less dosage, Eco-friendly and less fume
  • Low working temperature, it can fully react with aluminium molten
  • Easy operation, it can added by manually and injection equipment
  • Excellent performance in removing oxide inclusions and drossing from aluminium melt
  • There are sodium free recipe refining flux, suitable for high mg content aluminium alloy, avoid or reduce the white spots on the surface of aluminium and aluminium alloys, improve the product quality

Specification of Powder Refining Flux (SATA-PF-330)

  • White mixed powder
  • Dosage: Recommended dosage is 1-5kg per ton of aluminium molten weight, please contact the seller to get exact dosage according the aluminium products
  • Working temperature is 650℃ to 750℃

Package of Powder Refining Flux (SATA-PF-330)

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight, keep sealed before using.

NOTE: This flux has serious hygroscopicity, please use immediately after opening

See More
  • Master Alloy

    Master Alloy

    September 18, 2019Master AlloyDescription of Master AlloySATA-Master alloys melt at a lower temperature as compared to primary metals. Controlled addition makes it easier to produce the final alloy of consistent compos...view
  • CAF2

    CAF2

    September 28, 2018General Description of Fluorspar (CaF2)Purity: 40%-99% in the form of powder and lumpSize :Metallurgical grade fluorspar: 0-10mm 10-60mm 20-70mm 30-80mmPurity: 60%-99.5%Acid grade fluorspar: 200m...view
  • Granulated Fused Refining Flux for Aluminium Cable & Wires

    Granulated Fused Refining Flux for Aluminium Cable & Wires

    October 13, 2021General Description of Granulated Fused Refining Flux for Aluminium Cable &wiresAluminium Cable &wires is a kind of 1xxx and 6xxx series alloy, requires the aluminium alloy with good electrica...view
  • Grain Refiner

    Grain Refiner

    September 18, 2019Grain RefinerGeneral Description of Grain RefinerGrain refiner can optimize the form and grain distribution of eutectic silicon. The material synthetic mechanical properties, strength and ductility ar...view
Leave a Message Email Us

we will contact you within 24 hours.