Jinzhou Sata Fused Fluxes and New Materials Factory.
De-Na Flux
De-Na Flux
De-Na Flux
  • De-Na Flux

Na Remover (SATA-PF-380)

General Description of Na Remover (SATA-PF-380)

Although Na can inhibit grain growth and also it is a good modifier, it will adversely affect casting and processing properties for some alloys. The high Na content will increase the viscosity, especially for small-sized ingots with poor fluidity, resulting in rough surface and severe wrinkles. Moreover, the higher the mass% of Na, the higher the cracking tendency during casting. Therefore, Na amount must be strictly controlled during smelting.

Application of Na Remover (SATA-PF-380)

  • Suitable for aluminum alloys and other Na taboo alloys
  • Used to degas and cover, protect from oxidation
  • By Injector with inert gas can achieve higher refining performance
  • Advantage
  • Stable, environment-friendly, easy to use
  • Significant to remove Na, and low dosage
  • Reduce burning loss, and less fume and dust

Specification of Na Remover (SATA-PF-380)

  • Dosage: 0.6-0.9kg/MT
  • Appearance: off-white powder
  • Shelf life: 12 months

Package of Na Remover (SATA-PF-380)

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight.

See More
  • Grain Refiner

    Grain Refiner

    September 18, 2019Grain RefinerGeneral Description of Grain RefinerGrain refiner can optimize the form and grain distribution of eutectic silicon. The material synthetic mechanical properties, strength and ductility ar...view
  • Recovery Flux

    Recovery Flux

    September 28, 2018Application: Mainly used for primary aluminium ,aluminium alloy and secondary aluminium. It can be used for remove the floating dross on the surface of the molten aluminium, and can absorb slag near t...view
  • Degassing Flux

    Degassing Flux

    September 6, 2019Degassing Flux (SATA-PF-350)General descriptionPractice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of...view
  • Boron Nitride Coating

    Boron Nitride Coating

    October 13, 2021Appearance: White Powder/Pasty LiquidSmell: No SmellMelting Point: 3000℃Mohs hardness: 2Water Solubility: Completely Soluble in WaterCAS NO: 10043-11-5EINECS NO: 233-136-6General Description of Boron...view
Leave a Message Email Us

we will contact you within 24 hours.