Jinzhou Sata Fused Fluxes and New Materials Factory.
SATA-GF-NK1
SATA-GF-NK1
SATA-GF-NK1
  • SATA-GF-NK1

SATA-GF-NK1

General Description of SATA-GF-NK1

SATA-GF-NK1 flux is a synthetic anhydrous inorganic salt fused together by different proportion, which is excellent in removing non-metallic inclusions and hydrogen from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480 ℃. Molten aluminum and drosses can be easily separated to facilitate slag-off. SATA-GF-NK1 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (USA).

Application of SATA-GF-NK1

  • Suitable for A356 and ADC12 alloys, for reverberatory furnace
  • Used to purify molten aluminum
  • Used to remove non-metallic inclusions and hydrogen in molten aluminum
  • By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance

Advantage of SATA-GF-NK1

  • Less dust and fume, and with low dosage
  • Low melting point for rapid dispersion
  • Obtain dry and loose drosses, complete separation from molten aluminum
  • Reduce porosity, improve mechanical and casting properties of alloys
  • Increase the fluidity of molten aluminum

Specification of SATA-GF-NK1

  • Furnace temperature: 720-760℃
  • Dosage: 0.25-1kg/MT
  • Appearance: off-white granule
  • Grain size: 1-3mm/1-2.5mm
  • Shelf life: 12 months

Package of SATA-GF-NK1

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight.

See More
  • SATA-GF-M14

    SATA-GF-M14

    September 18, 2019SATA-GF-M14General Description of SATA-GF-M14SATA-GF-M14 flux is a synthetic anhydrous inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossi...view
  • Mg-Remover Flux

    Mg-Remover Flux

    September 28, 2018General introductionMagnesium plays a very important part in producing the required physical properties of many aluminium alloys, its presence in others is not required at all or must be held to a ver...view
  • SATA-GF-M11

    SATA-GF-M11

    September 18, 2019SATA-GF-M11General Description of SATA-GF-M11SATA-GF-M11 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refin...view
  • Special Granulated Fluxes For ADC12

    Special Granulated Fluxes For ADC12

    December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
Leave a Message Email Us

we will contact you within 24 hours.