Covering Flux, Magnesium Covering Flux Manufacturer & Supplier | SATA
Jinzhou Sata Fused Fluxes and New Materials Factory.
Covering Flux
Covering Flux
Covering Flux
  • Covering Flux

General Itroduction of Covering Flux

Covering flux is used for smelting and casting. It has strong surface tension, not easy to rupture, good protection, long duration, with strong absorption to hydrogen oxidation inclusions and not easy produce flux  impurities.

Function of Covering Flux

The combination of magnesium and potassium chlorides provides the low melting eutectic，while the fluoride provides the surface wettability and chemical reactivity with magnesium oxide to cause sufficient removal. MgO increases the viscosity of flux. The barium compound provides the density requirement for the salt to effectively mix with the magnesium and then settle out at the bottom of the crucible.

Grade

Main composition：（%）

MgCl2

KCl

NaCl

CaCl2

Foaming agent

special material

H2O

other

Cover agent

65±3

20±2

5±2

5±2

3

5

＜1.5




See More
  • Slagging Fluxes For Steel

    Slagging Fluxes For Steel

    December 25, 2020Description & Application of Slagging Fluxes For SteelCompare with the Caf2,This kind of flux can reduce 40-60% of the dosage than Caf2. At the meanwhile reduce the emission of SIF4 and other harm...view
  • De-Na Flux

    De-Na Flux

    September 6, 2019Na Remover (SATA-PF-380)DescriptionAlthough Na can inhibit grain growth and also it is a good modifier, it will adversely affect casting and processing properties for some alloys. The high Na content ...view
  • CAF2

    CAF2

    September 28, 2018General Description of Fluorspar (CaF2)Purity: 40%-99% in the form of powder and lumpSize :Metallurgical grade fluorspar: 0-10mm 10-60mm 20-70mm 30-80mmPurity: 60%-99.5%Acid grade fluorspar: 200m...view
  • Granulated De-Na Flux

    Granulated De-Na Flux

    October 13, 2021General Description of Granulated De-Na FluxSodium is almost insoluble in Aluminium and Aluminium alloy. When the magnesium content in the aluminum alloy exceeds 2%, the sodium in the melt will appear...view
Leave a Message Email Us

we will contact you within 24 hours.