Jinzhou Sata Fused Fluxes and New Materials Factory.
SATA-GF-M14
SATA-GF-M14
SATA-GF-M14
  • SATA-GF-M14

SATA-GF-M14

General Description of SATA-GF-M14

SATA-GF-M14 flux is a synthetic anhydrous inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering, degassing, etc. SATA-GF-M14 flux is excellent in removing non-metallic inclusions (oxides, carbides and borides) and alkali metals (Na, Li, Ca) from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480℃. Since there is potassium content free in SATA-GF-M14, it has special excellent performance for electrolytic aluminium ingot. In addition, SATA-GF-M14 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (USA).

Application of SATA-GF-M14

  • Suitable for 1xxx/3xxx/5xxx/8xxx aluminum alloys, especially for electrolytic aluminum ingot
  • Used to remove non-metallic inclusions in molten aluminum
  • Used to remove alkali metals in molten aluminum
  • By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance

Advantage of SATA-GF-M14

  • Prevent furnaces, launders, in-line degassers and casting nozzles from piling sludge and slag
  • Reduce metal loss
  • Less fume and no dust , with low dosage
  • Low melting point for rapid dispersion
  • Obtain dry and loose dross

Specification of SATA-GF-M14

  • Furnace temperature: 700-750℃
  • Dosage: 0.25-1kg/MT
  • Appearance: off-white granule
  • Grain size: 1-3mm/1-2.5mm
  • Shelf life: 12 months

Package of SATA-GF-M14

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight.

See More
  • Recovery Flux

    Recovery Flux

    September 28, 2018Application: Mainly used for primary aluminium ,aluminium alloy and secondary aluminium. It can be used for remove the floating dross on the surface of the molten aluminium, and can absorb slag near t...view
  • Granular Drossing Fluxes

    Granular Drossing Fluxes

    December 25, 2020Description of Granular Drossing FluxesCompare with the powder drossing(Deslagging) fluxes. Granular drossing fluxes is a kind of eco-friendly fluxes with the more better effections. With the effectiv...view
  • Sodium Fluosilicate/Hexafluorosilicate (SSF)

    Sodium Fluosilicate/Hexafluorosilicate (SSF)

    September 28, 2018Sodium Silicfluoride,Sodium Fluosilicate General introduction: Chemical Formula : Na2SiF6 UN NO.: 2674 CAS NO.:16893-85-9 Off white crystalline powder Solubility: Soluble in water up to 1.45g/100ML a...view
  • Talc Powder

    Talc Powder

    June 2, 2020Purity: SiO2>60%Appearance: White powderWhiteness: 86.36%Grain Size: D50 6.92 L.O.S: 7.5%CAS No: 14807-96-6HS Code: 2526202001Specification of Talc PowderChemical CompositionStandardSiO260%minMgO35...view
Leave a Message Email Us

we will contact you within 24 hours.