Jinzhou Sata Fused Fluxes and New Materials Factory.
SATA-GF-M11
SATA-GF-M11
SATA-GF-M11
  • SATA-GF-M11

SATA-GF-M11

General Description of SATA-GF-M11

SATA-GF-M11 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering, degassing, etc. SATA-GF-M11 flux is excellent in removing non-metallic inclusions (oxides, carbides and borides) and alkali metals (Na, Li, Ca) from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480℃. Since there is none sodium content in SATA-GF-M11, it has an excellent performance for high magnesium alloys (Mg>2), avoiding the phenomenon of “sodium brittle”. SATA-GF-M11 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (USA).

Application of SATA-GF-M11

  • Suitable for 1xxx/3xxx/8xxx aluminum alloys
  • Used to remove non-metallic inclusions in molten aluminum
  • Used to remove alkali metals in molten aluminum
  • Excellent to remove high magnesium (Mg>2) alloys
  • By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance.
  • Obtain dry and loose drosses

Advantage of SATA-GF-M11

  • Increases the extrusion speed and die life when extruding profiles
  • Reduces the number of breaks in continuous casting
  • Eliminates edge cracks when rolling high Mg aluminium alloys
  • Free of fluorides. Zero fluoride emissions.
  • Non-hazardous compound
  • Low melting point for rapid dispersion (<766°F, 480°C)
  • Less hygroscopic than magnesium
  • Replaces chlorine gas in furnace fluxing
  • Reduces the use of chlorine gas in in-line refining systems
  • Low application rates, typical 0.5 kg / MT aluminium
  • Keeps the furnace, launders, in-line degassers and casting nozzles free from sludge and dross built-up

Specification of SATA-GF-M11

  • Furnace temperature: 700-760℃
  • Dosage: 0.25-1 kg/MT
  • Appearance: off-white granule
  • Grain size: 1-3mm/1-2.5mm
  • Shelf life: 12 months

Package of SATA-GF-M11

  • Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
  • Stored in dry, well-ventilated place, and avoid direct sunlight.

See More
  • Magnesium Chloride Hexahydrate Pellet

    Magnesium Chloride Hexahydrate Pellet

    September 28, 2018General Introduction:Chemical formular: Mgcl2 6H2OPurity: 46.00%min.Appearance: pure white pellet CAS NO.:7791-18-6Application:De-Icing AgentLiquid magnesium chloride is widely used as an anti-icer. I...view
  • Talc Powder

    Talc Powder

    June 2, 2020Purity: SiO2>60%Appearance: White powderWhiteness: 86.36%Grain Size: D50 6.92 L.O.S: 7.5%CAS No: 14807-96-6HS Code: 2526202001Specification of Talc PowderChemical CompositionStandardSiO260%minMgO35...view
  • Slagging Fluxes For Steel

    Slagging Fluxes For Steel

    December 25, 2020Description & Application of Slagging Fluxes For SteelCompare with the Caf2,This kind of flux can reduce 40-60% of the dosage than Caf2. At the meanwhile reduce the emission of SIF4 and other harm...view
  • De-Ca Flux

    De-Ca Flux

    September 6, 2019Ca Remover (SATA-PF-360)DescriptionCalcium is used as alloying element in few aluminum alloys, However, under most circumstances it is present as impurities. Since calcium has adverse effect on mechan...view
Leave a Message Email Us

we will contact you within 24 hours.