Name: SATA-GF-M12
Brand: Jinzhou Sata Fused Fluxes and New Materials Factory.

SATA-GF-M12

General Description of SATA-GF-M12

SATA-GF-M12 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering, degassing, etc. SATA-GF-M12 flux is excellent in removing non-metallic inclusions (oxides, carbides and borides) and alkali metals (Na, Li, Ca) from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480 ℃. Since there is none sodium content in SATA-GF-M12, it has an excellent performance for high magnesium alloys (Mg＞2), avoiding the phenomenon of “sodium brittle”. SATA-GF-M12 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (EPA).

Application of SATA-GF-M12

Suitable for 1xxx/5xxx/6xxx aluminum alloys
Used to remove non-metallic inclusions in molten aluminum
Used to remove alkali metals in molten aluminum
Excellent to remove high magnesium (Mg＞2) alloys
By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance.
Obtain dry and loose drosses

Advantage of SATA-GF-M12

Increases the extrusion speed and die life when extruding profiles
Reduces the number of breaks in continuous casting
Eliminates edge cracks when rolling high Mg aluminium alloys
Free of fluorides. Zero fluoride emissions
Non-hazardous compound
Low melting point for rapid dispersion (<766°F, 480°C)
Less hygroscopic than magnesium
Replaces chlorine gas in furnace fluxing
Reduces the use of chlorine gas in in-line refining systems
Low application rates, typical 0.5 kg / MT aluminium
Keeps the furnace, launders, in-line degassers and casting nozzles free from sludge and dross built-up

Specification of SATA-GF-M12

Furnace temperature: 680-720℃
Dosage: 0.25-1kg/MT
Appearance: off-white granule
Grain size: 1-3mm/1-2.5mm
Shelf life: 12 months

Package of SATA-GF-M12

Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight.

Mg-Remover Flux
September 28, 2018General introductionMagnesium plays a very important part in producing the required physical properties of many aluminium alloys, its presence in others is not required at all or must be held to a ver...view
Anhydrous Magnesium Chloride
September 4, 2019Magnesium Chloride Anhydrous (AMC)General Description of Magnesium Chloride Anhydrous (AMC)Name: Magnesium Chloride Anhydrous (AMC)By-product of titanium sponge Appearance: White Block/Flake/PowderGra...view
Magnesium Chloride Hexahydrate Flake
September 18, 2019Magnesium Chloride Hexahydrate FlakeGeneral Description of Magnesium Chloride Hexahydrate FlakeChemically, magnesium chloride is represented as MgCl2. It is a naturally occurring mineral salt which is...view
SATA-GF-M13
September 18, 2019SATA-GF-M13DescriptionSATA-GF-M13 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering...view