SATA-GF-M13 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering, degassing, etc. SATA-GF-M13 flux is excellent in removing non-metallic inclusions (oxides, carbides and borides) and alkali metals (Na, Li, Ca) from molten aluminum and aluminum alloys. An eutectic can be formed to make the melting point of fluxes lower than 480 ℃. There is none sodium content in SATA-GF-M13, so as to avoid the phenomenon of “sodium brittle”. SATA-GF-M13 flux is environment-friendly with less fume and dust, which conforms to Emission Standards of Environmental Protection Agency (USA).
Application of SATA-GF-M13
Suitable for 1xxx/5xxx/6xxx aluminum alloys
Used to remove non-metallic inclusions in molten aluminum
Compared with M11 and M12 , M13 is featured with excellent performance on removing alkali metals
By Injector with inert gas can improve degassing, reduce metal porosity, achieving high refining performance
Obtain dry and loose drosses
Advantage of SATA-GF-M13
Prevent furnaces, launders, in-line degassors and casting nozzles from piling sludge and slag
Less dust and fume, and low dosage
Reduce metal loss
Low melting point for rapid dispersion
Improve mechanical and casting properties of aluminum alloys, and improve their quality
Specification of SATA-GF-M13
Furnace temperature: 680-720℃
Dosage: 0.25-1.2kg/MT
Appearance: off-white granule
Grain size: 1-3mm/0.8-3.25mm/1-2.5mm
Shelf life: 12 months
Package of SATA-GF-M13
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight.
September 6, 2019Degassing Flux (SATA-PF-350)General descriptionPractice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of...view
September 18, 2019SATA-GF-M14General Description of SATA-GF-M14SATA-GF-M14 flux is a synthetic anhydrous inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossi...view
September 6, 2019Na Remover (SATA-PF-380)DescriptionAlthough Na can inhibit grain growth and also it is a good modifier, it will adversely affect casting and processing properties for some alloys. The high Na content ...view
September 28, 2018General introduction1) It used as a washing and melt covering for crucible, ladle and other tools for smelting and casting mag and mag alloy with the features of good wetting ability with the molten m...view
