Alloying Additives Titanium Tablet, Titanium Additive | SATA
Jinzhou Sata Fused Fluxes and New Materials Factory.
Ti Tablet
Ti Tablet
Ti Tablet
  • Ti Tablet

Ti Tablet

General Description of Ti Tablet

Titanium Tablet is used to adjust the content of Ti content in Aluminium Alloy, it is made by metal powder and the rest are pure aluminium or flux in proportion.
High efficiency is above 90%, the flux in the metal additives is favor for refining, purification, has effect of degassing, drossing and no content to make pollution.
Suitable for non-ferrous metal plates, strips, foils, profiles, rods, cables and alloys for the preparation of colored grades.
Density:3.8-4.1g/cm³
Content: metal powder+ rest
Metal powder:75%、80%、85%、90%、95%
Rest: A-Sodium free flux,  B- flux+aluminium

Usage Instruction of Ti Tablet

Before refining flux application, the metal additives can be put into melting furnace or holding furnace directly. To achieve the high efficiency, should match up the right notice as follows:
  1. The temperature of the aluminium liquid not lower than 740℃ the best application temperature is 750+5℃
  2. It is sink down by itself, so keep the surface clean is very important. to avoid wrapped by the floating slag or the slage which floated on the surface. So it must be put into after drossing.
  3. After skimming the dross, the tablet should be put directly in to the aluminium molten evenly with tablet please do not crush it, keep it stay for 20-30mintures, stir it and let it stay  for 7-15 minutes. Sample analysis should be performed.

Dosage of Ti Tablet

Dosage=(Target-initial)*aluminium wt% /(90% * the alloy element content in the metal additives)
Target: element content of target
Initial: Original content of elements in the melt
Wt: The weights of aluminium melt

Specification of Ti Tablet

Product Percentage of Element Density Appearance Work Temperature
Ti Tablet
Ti: 75%,80%,85%,90%,95%
Balance: pure aluminium or flux
3.8-4.1g/cm³ Grey 750+5℃
Fe Tablet
Fe: 75%,80%
Balance: pure aluminium or flux
Grey Brown
Mn Tablet
Mn: 70%,80%
Balance: pure aluminium or flux
Black Grey
Cr Tablet
Cr: 75%,85%
Balance: pure aluminium or flux
Grey
Cu Tablet
Cu: 75% - 80% - 85% - 90%
Balance: pure aluminium or flux
Reddish Brown

Advantage of Ti Tablet

  • It can be put into the normal temperature aluminium metal
  • High density, easy to sink down
  • reaction quickly, no oxidation and burn loss

Package of Ti Tablet

500g/tablet.4 tablets wrapped by foil package load in 20kg carton.

See More
  • Special Granulated Fluxes For ADC12

    Special Granulated Fluxes For ADC12

    December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
  • Cu Tablet

    Cu Tablet

    September 18, 2019Cu TabletGeneral Description of Cu TabletCu Tablet is used to adjust the content of Cu in Aluminium Alloy; it is made by metal powder and pure aluminium in proportion. Density:3.8-4.1g/cm3Content: met...view
  • SATA-GF-M15

    SATA-GF-M15

    October 13, 2021SATA-GF-M15 is a kind of synthetic anhydrous inorganic salt, which has multi-functions, such as refining, drossing, covering, degassing etc… SATA-GF-M15 has excellent performance in removing alkali m...view
  • Granulated De-Na Flux

    Granulated De-Na Flux

    October 13, 2021General Description of Granulated De-Na FluxSodium is almost insoluble in Aluminium and Aluminium alloy. When the magnesium content in the aluminum alloy exceeds 2%, the sodium in the melt will appear...view
Leave a Message Email Us

we will contact you within 24 hours.