Magnesium Flux, Magnesium 2# Flux Manufacturer & Supplier | SATA
Jinzhou Sata Fused Fluxes and New Materials Factory.
2# Flux
2# Flux
2# Flux
  • 2# Flux

General Introduction of 2# Flux

  • It used as a washing and melt covering for crucible, ladle and other tools for smelting and casting mag and mag alloy with the features of good wetting ability with the molten metal and tools.
  • The density of flux is less than the magnesium melts in the molten state, with the function of covering and fire extinguishment. With excellent
  • performance refining function on crude magnesium.
  • The cleaned tools is not easy contaminated on the melt and pouring metal melt.
It played a significant role on improving the quality of ingot and casting, reduce metal loss and increase the service life of the tools.


Grade

Main composition(%)

MgCl2

KCl

BaCl2

CaF2

NaCl

CaCl2

MgO


Insoluble Substance


H2O

Secondary Flux

45-50

--

--

--

45-50

5

---

≤1.5

≤1.5

Function of 2# Flux

The combination of magnesium and potassium chlorides provides the low melting eutectic,while the fluoride provides the surface wettability and chemical reactivity with magnesium oxide to cause sufficient removal. MgO increases the viscosity of flux. The barium compound provides the density requirement for the salt to effectively mix with the magnesium and then settle out at the bottom of the crucible.


See More
  • Master Alloy

    Master Alloy

    September 18, 2019Master AlloyDescription of Master AlloySATA-Master alloys melt at a lower temperature as compared to primary metals. Controlled addition makes it easier to produce the final alloy of consistent compos...view
  • CAF2

    CAF2

    September 28, 2018General Description of Fluorspar (CaF2)Purity: 40%-99% in the form of powder and lumpSize :Metallurgical grade fluorspar: 0-10mm 10-60mm 20-70mm 30-80mmPurity: 60%-99.5%Acid grade fluorspar: 200m...view
  • Special Granulated Fluxes For ADC12

    Special Granulated Fluxes For ADC12

    December 25, 2020DescriptionADC12 is a kind of die-cast aluminum alloy, suitable for cylinder head cover, sensor bracket, cover, cylinder block, etc. Due to the good moldability of die-casting, It is suitable for thin...view
  • De-Na Flux

    De-Na Flux

    September 6, 2019Na Remover (SATA-PF-380)DescriptionAlthough Na can inhibit grain growth and also it is a good modifier, it will adversely affect casting and processing properties for some alloys. The high Na content ...view
Leave a Message Email Us

we will contact you within 24 hours.