Fluxes for aluminum alloys are widely used in the production of primary aluminum and secondary aluminum to improve the quality of the melt and the recovery rate of metallic aluminum.
1. Fluxes for aluminum alloys can change the wettability of aluminum melt to oxide (aluminum oxide), making aluminum melt easy to separate from oxide (aluminum oxide), so that most of the oxide (aluminum oxide) enters the fluxes for aluminum alloys and reduces the oxide content in the melt.
2. Fluxes for aluminum alloys can change the state of the oxide film on the surface of the melt. This is because it can break the solid and dense oxide film on the surface of the melt into fine particles, which is beneficial for the hydrogen in the melt to permeate and escape from the particle gaps of the oxide film and enter the atmosphere.
3. The existence of the fluxes for aluminum alloys layer can isolate the contact between the water vapor in the atmosphere and the aluminum melt, make it difficult for hydrogen to enter the aluminum melt, and at the same time prevent the melt from oxidizing and burning.
4. Fluxes for aluminum alloys can absorb the oxides in the aluminum melt, so that the melt can be purified.
JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY has an independent flux formulation development department, which can provide different formulations according to customer needs to meet various needs of customers. The granular molten aluminum alloy flux independently developed by our company is a new type of environmental protection type flux, there is no dust and smoke emission during use, conforms to international environmental protection standards, and improves the working environment of workers. The use of this flux is low and can save costs. Customers are welcome to come and buy.