Jinzhou Sata Fused Fluxes and New Materials Factory.
Characteristics and Usage of Chromium Additives


Ⅰ. The characteristics of Chromium additives

1. High recovery rate and long shelf life.

2. Containing 75% chromium and 5% aluminum. When used correctly, the recovery rate is guaranteed to be above 98%.

3. It melts quickly, and the molten aluminum is stable and smokeless.

Ⅱ. The usage of Chromium additives

1. Adjust the temperature of the molten aluminum not to be lower than 730℃, and the temperature to not lower than 750℃.

2. Calculate the required amount according to the composition standard of the gold to be blended.

3. Dry the aluminum slag, throw it into the aluminum liquid, and then stir it. The stirring time of Chromium additives should not be less than 5 minutes.

Ⅲ. The specifications of Chromium additives

Each piece of chromium additive contains 375 grams of Chromium.

Ⅳ. The use of Chromium additives requires attention

1. After unpacking, the Chromium additives should be used up within five days as much as possible.

2. The Chromium additives after unpacking should be used up within one month as far as possible.

3. Store at low temperature (<200℃) by the furnace before use.

JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY (abbreviated as SATA) is a professional aluminum flux manufacturer. We have comprehensive product development, manufacturing, business management and service capabilities. We can provide high-quality products, such as granular flux and sodium-free refining agent. In addition, we can also provide raw materials and auxiliary products for flux-free, such as anhydrous magnesium chloride, magnesium chloride hexahydrate, synthetic cryolite, aluminum fluoride, aluminum potassium fluoride, etc., if necessary, please contact us to purchase products.