Jinzhou Sata Fused Fluxes and New Materials Factory.
Aluminium Fluoride Anhydrous
Aluminium Fluoride Anhydrous
Aluminium Fluoride Anhydrous
  • Aluminium Fluoride Anhydrous

Aluminium Fluoride Anhydrous

General Description ofAluminium Fluoride Anhydrous

Molecular Formula: AlF3
CAS NO.:7784-18-1
EINECS No.:232-051-1
Bulk Density: 1.51g/l
Specific Gravity: 2.88g/cm3
HS Code:2826121000
Solubility: Soluble in water slightly and great soluble in HF liquid.
Appearance: free-flowing crystal type
Particle size Distribution:
-100mesh 2% max
-325mesh 8% max

ApplicationofAluminium Fluoride Anhydrous

  • Particle size Distribution:
It can lower the smelting temperature, increase the electricity conductivity, and adjust the molecular ratio during aluminium electrolyzing; it is propitious to the aluminium oxide electrolyte and reduces the energy consumption during smelting.
Its advantage such as high impurity, low moisture and high bulk density, which can reduce environmental pollution, energy consumption and waste emission during aluminium smelting.
  • An polarizer in the manufacture of enamel;
  • An pacifier and auxiliary solvent of glass and enamel;
  • An insecticide of crops;
  • A flux in aluminum alloy casting;
  • In the production of ferrous alloy and effervescing steel;
  • As well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

SpecificationofAluminium Fluoride Anhydrous

No. Chemical Constituent (mass fraction) %
F Al Na SiO2 Fe2O3 SO4 P2O5 Loss of Ignition
Apparent
density
g/cm3
 AlF-0 61 31.5 0.3 0.1 0.06 0.1 0.3 0.5 1.5
 AlF-1 60 31 0.4 0.3 0.1 0.6 0.04 1 1.3
 AlF-2 58 29 2.8 0.3 0.12 1 0.04 5.5 0.7
 AlF-3 58 29 2.8 0.35 0.12 1 0.04 5.5 0.7

PackageofAluminium Fluoride Anhydrous

25kg/50kg/super bag or according to customer's requirements.

See More
  • Degassing Flux

    Degassing Flux

    September 6, 2019Degassing Flux (SATA-PF-350)General descriptionPractice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of...view
  • SATA-GF-M13

    SATA-GF-M13

    September 18, 2019SATA-GF-M13General Description of SATA-GF-M13SATA-GF-M13 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refin...view
  • Aluminium Strontium Alloys

    Aluminium Strontium Alloys

    September 18, 2019Aluminium Strontium AlloysGeneral Description of Aluminium Strontium AlloysModifiers transform the coarse plate-like crystals of silicon in to finely dispersed granular shapes. This improves mechanica...view
  • Refining Flux

    Refining Flux

    September 28, 2018General introduction:Flux refining is the old but the most common way of refining magnesium and magnesium scrap.The flux used for cleaning the underlying metal of impurities is called Refining flux.1)...view
Leave a Message Email Us

we will contact you within 24 hours.