Name: Dissolving Agent
Brand: Jinzhou Sata Fused Fluxes and New Materials Factory.

Dissolving Agent

General Introduction of Dissolving Agent

It is a compound smetling flux for magnesium and its alloy, to protect magnesium melt and accelerate the melting rate.

Function of Dissolving Agent

The combination of magnesium and potassium chlorides provides the low melting eutectic，while the fluoride provides the surface wettability and chemical reactivity with magnesium oxide to cause sufficient removal. MgO increases the viscosity of flux. The barium compound provides the density requirement for the salt to effectively mix with the magnesium and then settle out at the bottom of the crucible.

flux	Main composition（%）
flux	MgCl2	KCl	BaCl2	CaF2	NaCl	CaCl2	MgO	Insoluable Substance	H2O
Dissolving Flux	42-48	33-37	5-9	--	8-12	<1.5	---	≤1.5	≤1.5

Degassing Flux
September 6, 2019Degassing Flux (SATA-PF-350)General descriptionPractice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of...view
Master Alloy
September 18, 2019Master AlloyDescription of Master AlloySATA-Master alloys melt at a lower temperature as compared to primary metals. Controlled addition makes it easier to produce the final alloy of consistent compos...view
De-Ca Flux
September 6, 2019Ca Remover (SATA-PF-360)DescriptionCalcium is used as alloying element in few aluminum alloys, However, under most circumstances it is present as impurities. Since calcium has adverse effect on mechan...view
Mg-Remover Flux
September 28, 2018General introductionMagnesium plays a very important part in producing the required physical properties of many aluminium alloys, its presence in others is not required at all or must be held to a ver...view

Leave a Message Email Us

we will contact you within 24 hours.

General Introduction of Dissolving Agent

Function of Dissolving Agent

Degassing Flux

Master Alloy

De-Ca Flux

Mg-Remover Flux