Jinzhou Sata Fused Fluxes and New Materials Factory.
Grain Refiner
Grain Refiner
Grain Refiner
  • Grain-Refiner-4.jpg

Grain Refiner

General Description of Grain Refiner

Grain refiner can optimize the form and grain distribution of eutectic silicon. The material synthetic mechanical properties, strength and ductility are enhanced. At same time, it can minimize hot cracking tendency.Control the structure and dispersion of individual crystals in metals improved mechanical strength and soundness of the casting.

Specification of Grain Refiner

Product composition Form
AlTiC AlTi3C0.15 3% Titanium 0.15%C cut rod/coiled rod/cast cut bar/waffle ingot
AlTi3C0.3 3% Titanium 0.3%C
AlTi5C0.15 5% Titanium 0.15%C
AlTi5C0.3 5% Titanium 0.3%C
AlTi AlTi 4% 5% 6% 10% 15% Titanium Ingot/rod
AlTiB AlTi10B1 10%Titanium 1%Boron Waffle ingot/rod/coil
AlTi10B0.4 10%Titanium 0.4%Boron
AlTi5B1 5%Titanium 1%Boron
AlTi5B0.2 5% Titanium 0.2% Boron
AlTi5B0.6 5% Titanium 0.6% Boron
AlTi3B1 3% Titanium 1% Boron
AlTi3B0.4 3% Titanium 0.4% Boron
AlTi3B0.2 3% Titanium 0.2% Boron
AlP 4%P waffle ingot
AlZr 4% 5 % 6% 10% 15%Zr waffle ingot
AlSb 5%/10%Sb waffle ingot


Advantage of Grain Refiner

  • Improve the strength and toughness of aluminum alloy.
  • Eliminate columnar grains and feathery grains.
  • Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation.
  • Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility
  • Reduce surface defects of aluminum product by improving its ductility.
  • Improve calendaring rate and productivity on the premise of ensuring the quality of products.
  • Increase the using time of the calendaring molds and auxiliary equipment on the premise of ensuring the quality of products.
  • Make the surface of aluminum more beautiful by improving the surface treatment of aluminum product

Application of Grain Refiner

  • Hardeners: Used for enhancing physical and mechanical properties of metal alloys.
  • Grain Refiners: Used for controlling the dispersion of individual crystals in metals to produce a finer and more uniform grain structure
  • Modifiers & Special Alloys: Typically used to increase strength, ductility and machinability.

Using method of Grain Refiner

  • Baking before using
  • Operation temperature 680-720 ℃
  • Joint quantity: Self controlled by calculation and test according to actual condition.
  • Joint method: After digging up the drum. Plunge the additives slightly to the Al liquid and mix evenly. Keep immersing for 5-10 minutes.

Storage of Grain Refiner

If stored in low humidity environment in the original packing, product can be preserved for a long time.


See More
  • SATA-GF-M13

    SATA-GF-M13

    September 18, 2019SATA-GF-M13DescriptionSATA-GF-M13 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refining, drossing, covering...view
  • SATA-GF-M13

    SATA-GF-M13

    September 18, 2019SATA-GF-M13General Description of SATA-GF-M13SATA-GF-M13 flux is a synthetic anhydrous carnallite inorganic salt fused together by different proportion, which has multi-functions in one, such as refin...view
  • Ti Tablet

    Ti Tablet

    September 18, 2019Ti TabletGeneral Description of Ti TabletTitanium Tablet is used to adjust the content of Ti content in Aluminium Alloy, it is made by metal powder and the rest are pure aluminium or flux in proportio...view
  • Potassium Aluminium Fluoride (PAF)

    Potassium Aluminium Fluoride (PAF)

    September 28, 2018General IntroductionMolecular Formula: KALF4 /K3ALF6CAS NO.:13775-52-5It is an inorganic compound. PAF is also known as: Potassium Cryolite, Potassium Tetrafluoraluminate, Kalium Aluminum Fluoride, KA...view
Leave a Message Email Us

we will contact you within 24 hours.