Jinzhou Sata Fused Fluxes and New Materials Factory.
MgCl2 Anhydrous-block
MgCl2 Anhydrous-block
Product Introduction:
Anhydrous magnesium chloride is a by-product of the production of titanium sponge, and the reaction principle is TiCL4 +2 Mg === Ti + 2MgCL2. Its generated anhydrous magnesium chloride content is up to 99% or more and does not contain alkali metal salts (KCL, NaCl, CaCL2, etc. ). Anhydrous magnesium chloride was just released when the liquid temperature is above 714 °in red, and then liquid anhydrous magnesium chloride discharged into the iron box after the natural cooling was white solid and then crushed into pieces as customer requirement and then by mechanical bagging.

Application :
  • Anhydrous magnesium chloride is mainly raw meterials of foundry flux for aluminium and magensium industry
  • Anhydrous magnesium chloride is used to produce magnesium compounds such as magnesium carbonate, magnesium hydroxide, and magnesium oxide.
  • High-quality magnesium chloride anhydrous powder in magnesite products can beused as high-quality fireproof board, magnesium tile,light wallboard,stove,fireworks fixative, etc..
  • High-quality magnesium chloride anhydrous powder can also be used as a food additive, protein coagulant, dustproofing agent, etc.

Similar Products
  • N-series Flux

    N-series Flux

    September 28, 2018SATA-N-series fluxThe main components of N-series Granular Fused Fluxes are Chloride and Fluoride salts with other salts and compounds. Then mixed dry raw materials together and fused or melted into a...view
  • Mg Remover Flux

    Mg Remover Flux

    September 28, 2018General introductionMagnesium plays a very important part in producing the required physical properties of many aluminium alloys, its presence in others is not required at all or must be held to a ver...view
  • CAF2

    CAF2

    September 28, 2018General Description of Fluorspar (CaF2)Purity: 40%-99% in the form of powder and lumpSize :Metallurgical grade fluorspar: 0-10mm 10-60mm 20-70mm 30-80mmPurity: 60%-99.5%Acid grade fluorspar: 200m...view
  • MgCl2 Anhydrous-flake

    MgCl2 Anhydrous-flake

    September 28, 2018Product Introduction: Anhydrous magnesium chloride is a by-product of the production of titanium sponge, and the reaction principle is TiCL4 +2 Mg === Ti + 2MgCL2. Its generated anhydrous magnesium...view
Leave a Message Email Us

we will contact you within 24 hours.