Jinzhou Sata Fused Fluxes and New Materials Factory.
Ceramic Foam Filters
Ceramic Foam Filters
General Introduction:
Ceramic filter foams is just developed as a new type molten metal filters to decrease casting flaw in recent years, play a vital role in the metal casting and foundry industries, where they are used to filter out impurities in molten metal to improve the quality and performance of the end product.

Even the slightest non-metal impurities in molten metal can have a devastating effect on the performance and strength of finished metal goods. This can result in end products failing to meet the necessary quality standards, which may prove extremely costly if they need to be recast or scrapped. Ceramic filters play an essential role in removing these impurities and ensuring high-quality casting

we can supply ceramic filters in a wide range of thicknesses, pore sizes (8ppi and upwards) and composites to meet the needs of every metal casting process.

Whatever the application, with SATA Ceramic Foam filters you can be sure of the highest quality and superior performance every time.


Advantages:
●Decontaminate the melting metal liquid
●Improve the metallurgical structure of the castings.
●Reduce imparities of the castings Improve casting quality rate
●Reduce casting internal re-oxidation defects
●Reduce the surface defects after machining of the castings
●Improve the surface quality product performance and microstructure effectiveness
●It have no loose ceramic particles or powder
●Particles larger than the pore size are captured at the top of the ceramic foam filter
●Smaller particles are captured on the filter cake created by the larger particles
●Finer particles are captured within the pores in the filter
●Eliminates turbulence in the metal stream, Smooth out metal flow, avoiding sprays, splatter and backset. Improve fluidity, cast ability, machinability, yield.
●Remove a much greater fraction of fine particulate, Reduce rejects and rework, Provides consistent flow rate and capacity.
●Various sizes, shapes and pore sizes are available.

Similar Products
  • Synthetic Cryolite

    Synthetic Cryolite

    September 28, 2018General descriptionMolecular Formula: Na3AlF6CAS NO.:13775-53-6Density: 2.95-3.05g/cm3Bulk Density: 1.3-1.55g/lAppearance: Sandy, Powder, GranuleSize: 0-10mm 100% -0.045mm 10%maxThe grain size can ...view
  • CAF2

    CAF2

    September 28, 2018General Description of Fluorspar (CaF2)Purity: 40%-99% in the form of powder and lumpSize :Metallurgical grade fluorspar: 0-10mm 10-60mm 20-70mm 30-80mmPurity: 60%-99.5%Acid grade fluorspar: 200m...view
  • Metal Additives

    Metal Additives

    September 28, 2018General introduction Aluminium alloy metal additives are a new product used for replacing master alloy. It is a kind of block compressed with proportional combination of pure metal powder and flux wit...view
  • Magnesium Chloride White Flake

    Magnesium Chloride White Flake

    September 28, 2018General Introduction:Chemical formular: Mgcl2 6H2OPurity: 46.00%min.Appearance: pure white flakeCAS NO.:7791-18-6Chemically, magnesium chloride is represented as MgCl2. It is a naturally occurring min...view
Leave a Message Email Us

we will contact you within 24 hours.